Office Glass Partitions in Melbourne

Meeting rooms and private offices with daylight kept
Framed, frameless and part-glazed options
Damaged partition panels replaced
Installed room by room while the office keeps working

Grab a Glass Quote Now

Glass partitions turn one open floor into meeting rooms, offices and quiet areas while the daylight and the sightlines stay. Multiplex Glass & Glazing installs office glass partitions for Melbourne businesses and replaces damaged partition panels in existing fit-outs.

A partition project usually starts with a floor plan and a question: which spaces need to be closed off, and which only need to be separated. The answer decides the glass, the framing and the doors, so it is worth settling before anyone measures.

A glazed meeting room with a framed glass door standing ajar, seen from the open floor of an office

Partition Types and Where Each Fits

Framed partitions use an aluminium frame at the floor, ceiling and joints, with glass panels fixed inside it. They suit offices that need a solid, repeatable system across several rooms and make it easy to add a framed glass door.

Frameless partitions run glass panel to glass panel with slim joints and a channel at the floor and ceiling. They give the cleanest look for a boardroom or a front-of-house meeting room and are usually matched with a frameless glass door on patch fittings.

Part-glazed partitions combine a solid lower section with glass above. They are common where a room needs privacy at desk height but light across the top, such as a manager's office facing the open floor.

Glass office partition walls can also be built to full height for acoustic separation or to a partial height where the aim is visual separation rather than sound. Full-height glass with proper seals is what makes a meeting room usable for calls.

A frameless glass boardroom running panel to panel with a patch-fitting glass door, seen from the open floor

Choosing the Glass

Partition glass is selected under AS 1288, the Australian Standard for the selection and installation of glass in buildings, and industry guidance notes that building codes require safety glazing where people could walk into the glass, which is why partitions are glazed with safety glass. Toughened glass is the usual choice for framed and frameless partitions. Laminated glass is used where acoustic performance matters, because the interlayer reduces sound transfer between rooms.

Privacy is handled with frosted or banded film or an obscure glass. A visible band across clear glass at eye level is a practical safety feature in a busy office as well as a design choice.

A frosted band running across a clear glass office door at eye level, with a brushed steel pull handle

What Helps Us Quote Accurately

Before we quote a partition job, these are the things worth knowing about the space. A reader can tick them off from a floor plan or a walk around the office.

Ceiling type and height: a suspended grid ceiling and a plasterboard ceiling are fixed differently.
Where the doors go, and whether they are hinged or sliding.
Which rooms need acoustic separation for calls and meetings.
Whether the space is occupied during the work, which decides how the installation is staged.
Any existing partition system the new work must match.

Office glass partitions prices then follow the panel count, the height, the glass specification, the number of doors and the framing system. A single replacement panel in an existing framed system is a much smaller job than a new run of frameless rooms with doors.

A printed floor plan on a desk with a steel tape measure, a folding rule, a pencil and a sample of clear glass

Installation in a Working Office

Partition work usually happens while the business keeps operating. Panels are brought in and glazed room by room, with the floor and ceiling channels fixed first and the glass set last. Doors are hung and adjusted at the end so they close cleanly against the seals.

For a damaged panel in an existing partition, the cracked glass is removed, the opening is measured, and a replacement panel is cut to match the system. A customer described office glass replaced promptly with the mess cleaned up afterwards.

Where We Work

Multiplex covers Melbourne, with partition work in offices across the city and its growth corridors. Suburbs listed in the service area include Keilor, St Albans, Preston, Craigieburn and Werribee. If the property is elsewhere in Melbourne, call 03 9118 0467 with the address to confirm.

Keilor
St Albans
Preston
Craigieburn
Werribee

A plain two storey suburban commercial office building with a glazed ground floor entry on an overcast day

Get an Office Partition Quote

Send a floor plan or photos of the space, the suburb and a note on which rooms need to be private. For a damaged partition panel, call 03 9118 0467 and describe the panel size and the framing so the replacement can be arranged.